Dual-Action Hook & Loop Flexible Backing Plate 5"

THE BEST 5" Backing plate for your Dual Action POlisher. DA-Molded urethane backing plate. Nothing holds pads better then our Hook & Loop  flexible backing plates.

Chemical Guys Dual-Action Flexible Backing Plates minimize heat transfer, while it flexes just enough to contour to your autos bends curves. These backing plates are built tough and even carry a 1 Yr warrant. Ideal for use with Porter Cable 7424 Dual-Action Polisher or Chemical Guys Heavy Hitter DA.

Why get a molder urethane backing plate as apposed to some cheap shit you saw on line? Urethane is flexible and very durable.  Reinforced inner construction utilizes steel struts molded into the center hub to give the plate stability while  maintaining a great even surface for pads.

 Chemical Guys 5" Backing plates Are ideal for use with our complete line of 5" CCS PADS.

	5 1/4" Inch Yellow Cutting Pad -Use this pad to apply compounds or polishes to remove severe oxidation, swirls, and scratches in conjunction with a polishing compound. It is the most aggressive and should only be used on oxidized and older finishes. Always follow this pad with an orange pad and a fine polish and then a white pad to refine the paint until it is smooth.
	5 1/4" Inch Orange Light Cutting Pad-This firm, high density foam is ideal for scratch and defect removal. The orange foam offers the correction of a typical compounding pad whilst at the same time allowing the polishing ability of light cut foam pad. When used with heavier compounds it will remove moderate swirls and scratches with little or no haze. It s an all around pad that will work on most light to moderate imperfections.
	5 1/4" Inch Green Heavy Polishing Pad - This pad is is used by Mercedes Benz at OEM level and is designed to be used with a random orbital polisher (like the Porter Cable) It produces less spot heating and has a unique compression/load/deflection ratio which means it conforms quickly to contours. It is a high strength foam with 60 pores per sq. inch yet is softer and more forgiving than our regular foams which have 80 pores per sq. inch. This pad is tough enough to remove swirls and scuffs while at the same time producing a high gloss swirl free finish. This foam is also ideal for applying one-step cleaner waxes. It is a balance of polishing and finishing that is perfect for all-in-one product application.
	5 1/4" Inch White Polishing Pad -Less dense foam formula for the application of waxes, micro-fine polishes and sealants. This pad has very light cutting power so its perfect for pre-wax cleaners. It is the most well used pad as it is ideal for application of pre wax cleansers as well as many finishing polishes such as Pro-Polish Or FP-Final Polish.
	5 1/4" Inch Black Finishing Foam -Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of waxes, sealants, and glazes.
	5 1/4" Inch Blue Ultra Fine Finishing Pad - This pad has a ultra soft composition for applying glaze, finishing polish, sealants, and liquid waxes. Flat pad provides full contact with paint surface to minimize the pressure applied by the user.
	THE BEST 5" Backing plate for your Dual Action Polisher. DA-Molded urethane backing plate. Nothing holds pads better then our Hook & Loop  flexible backing plates. Dual-Action Flexible Backing Plates minimize heat transfer, while it flexes just enough to contour to your autos bends curves. These backing plates are built tough and even carry a 1 Yr warrant. Ideal for use with Porter Cable 7424 Dual-Action Polisher or Chemical Guys Heavy Hitter DA.